Vineyard Tours Wine DIYs

DIY Wine Cork Sign Holder

Recycle Wine Corks into an Elegant Sign Holder

Hey Everyone and Welcome to 2017!

An array of incredible and beautiful things happened in the tail end of 2016. The most wonderful of all is that we TIED THE KNOT in October! While it was a supremely happy time in our lives these past few months proved to be the most busy and hectic we’ve ever experienced. We wrapped up the wedding plans, took a mini-moon to the Finger Lakes wine country, celebrated birthdays (mine included), holidays, and everything in between. Life is starting to afford us with moments of stillness which means I can begin sharing some fun DIY wine-inspired projects with you.  The first tutorial I’m excited to share is sign holders made out of wine corks!

Taking the DIY Wedding Route

Like most couples planning their wedding, my now-husband and I had a budget that we wanted to stick to. One of the ways we managed to save on costs and stay on target was by making some of the décor pieces ourselves. Luckily, we secured our venue early in the planning stage which helped guide the theme, color and décor choices. You see, we held our ceremony and reception at Chamard Vineyards in Clinton, Connecticut.

While we didn’t want to exploit the “vineyard” theme we knew we wanted to incorporate a few key pieces to pay homage to the winery. Some of the wine-inspired DIY projects we created were gold spray-painted wine bottles used as flower vases, wine cork letters that spelled out the word “bar,” table numbers on wine bottles, and menu and cupcake sign holders made from wine corks. All four projects are easy to make and can complement any party theme.

hese cork sign holders turned out better than expected and tied into the winery setting perfectly.

Photo: Daphne and Dean

How to Make Wine Cork Sign Holders

In this first tutorial in our DIY wine crafts series, I’ll show you how to create whymsical yet sophisticated sign holders using wine corks. Admittedly, I stumbled on a similar idea for table numbers on Pinterest. Instead, we decided to use these clever beauties to hold our dinner menu and DIY hand-lettered cupcake label signs. Honestly, these sign holders are so versatile they can be used to prop up almost any tabletop signage thin enough to be inserted in between the corks.

TIP: Impress guests at your next wine tasting party (or any gathering) by displaying the wine menu with these wine cork sign holders. You can also display the wine by type in front of each bottle. 

These cork sign holders are simple to make, require few supplies and can be customized to suit your party’s needs. After you’ve prepared your materials, one sign holder can be made under 10 minutes.

Supplies Needed:

  • Tabletop or other surface to work on. For this project you’ll be using a glue gun. To prevent damage be sure to cover your surface with a tablecloth, placement or cardboard.
  • Glue Gun – This can be purchased at any craft store or online.
  • Glue gun refills – If making more than two.
  • 6 to 10 similar-sized corks per sign holder.
  • Optional: Jute twine, baker’s twine, washi tape or any other embellishment.

diy wine cork sign holder

The Prepwork:

1. Plug in your glue gun and let it warm up. Glue guns and glue will be very hot so please use caution.

2. Before you start, make sure you have aligned the corks in the configuration you want.

diy wine cork sign holder

For our cupcake signs we used six corks in two rows of three. Our menu signs required ten corks in two rows of five.

Which cork ends to use: It all depends on the condition of the corks. I suggest you use the end of the cork that sat inside the bottle to “face up” in the holder. Otherwise you may see the fractured end where the corkscrew was inserted. This may not be true for all corks. Use your judgement.

diy wine cork sign holder

Make the Sign Holders

1. Begin by adding a few beads or a thin line of glue to the first cork.

Note: If I wasn’t taking the picture at the same time it would have come out much neater.

diy wine cork sign holder
2. Immediately grab a second cork and adhere it. You’ll want to be quick because the glue dries wine cork sign holder
3. Repeat steps three and four to add the third cork. You should have a row of three corks.

diy wine cork sign holder
4. Add a thin line of glue to the “back” of the first cork. Now, add the next cork.

diy wine cork sign holder
5. Repeat until you have two rows of three corks adhered to each other.

If you want a larger version, use a formation of four and four corks. It really is up to you as how long these cork holders are.

diy wine cork sign holder
diy wine cork holder
6. Insert the printed table number, menu or other label in between the two rows. Be careful not push the paper too far down as it may separate the two rows of corks.

diy wine cork sign holders

Be careful not to push the paper too far down the middle of the sign holder. It may separate the corks.

Photo: Daphne and Dean

diy wine cork sign holder. Photo:

Optional: Finish the holder with jute or baker’s twine, washi tape or any other embellishment you’d like.

diy wine cork sign holder

These easy-to-make DIY cork sign holders are perfect for table numbers, menus and any tabletop signage. Each one can be customized to your desired size and can be embellished to compliment your colors and theme. Try them out and have fun uncorking all of those wine bottles!

diy wine cork sign holder photo:

This was our cupcake table! These beauties were so easy to make and added a special touch to our wedding.

Photo: Daphne and Dean

What do you think of this project? Will you try making a sign holder for your next party?

Wedding Details:

Photographers: Daphne and Dean – We can’t say enough about Erin and Peter. WE LOVE THEM!!!

Cupcakes and Cake (not pictured): A Little Imagination Cakes – Our cake was GORGEOUS and delicious. Coconut-Lime French Vanilla – one word: YUM.

Venue: Chamard Vineyards – Claire and Kathy are TOP NOTCH. They treated us like family. We love them!

Cake stands: T.J. Maxx

No Comments

Leave a Reply